层次分析法在飞机维修不安全事件影响因素评价中的应用

对飞机维修不安全事件的影响因素进行层次分解,构建层次矩阵;利用德尔菲法,导入不安全事件调查分析专家组成员对不安全事件的判断;结合层次分析法(AHP)对不安全事件影响因素进行定性和定量的评价。     

面向空中目标威胁评估的多传感器管理方法

为了降低在空中目标威胁评估任务中由于威胁评估结果的不准确性和传感器辐射所带来的潜在损失，提出了一种基于风险的多传感器管理方法。首先，基于部分可观马尔可夫决策过程建立了传感器管理模型；然后，给出了基于信息状态的威胁评估风险和传感器辐射风险的预测方法以量化潜在损失；接着，为获得更优的作战收益，以多步风险预测值为决策依据，以两种风险的加权和最小为优化目标建立了长期目标函数；最后，在求解目标函数时，将传感器管理问题转化为决策树搜索，设计了一种基于分支定界的标准代价搜索算法以快速获得高质量的管理方案。仿真实验表明，所提算法能够在搜索到高质量解的同时大幅减少计算时间和内存消耗；所提方法能够对风险进行准确预测，且相比于经典的传感器管理方法，所提方法具有更好的风险控制效果。     

APPLICATION OF HOT-PRESS SINTERING TECHNIQUE TO EXPLOSIVE CHARGE LINER OF PETROLEUM PERFORATION BULLET

介绍了一种制备石油射孔弹的药形罩的新方法，采用粉末冶金技术，热压烧结工艺制备石油射孔弹的药形罩，并对药形罩的烧结工艺进行了研究。实验结果表明，采用该工艺制备的石油射孔弹药形罩可以满足要求。     

一个实用的WIN95启动界面

本文通过用简单的方法修改ＭＳＤＯＳ．ＳＹＳ和重新配置ＡＵＴＯＥＸＥＣ．ＢＡＴ文件。     

焊接过程电信号在线监测研究现状及发展趋势

详细介绍了各种在线监测和分析方法在焊接过程电信号监测以及焊接质量评估中的应用，分析每一种在线监测方法的特点和焊接质量方面的应用现状。对各种在线监测方法在焊接质量监测中应用的发展趋势进行了分析和预测。     

某圆周缝型救生伞的充气性能研究

为获得新型圆周缝结构救生伞的充气性能,文章采用任意拉格朗日欧拉流固耦合方法对该救生伞进行了充气过程的数值模拟,用空投试验结果验证了该数值方法的可行性。数值结果得到了绕伞衣流场、伞衣外形、运动的动态信息,对数值结果的分析发现初始充气阶段后期流场对上部伞衣影响很大,为充气过程中上部伞衣的控制提供了依据,但是初始充气期救生伞的摆动角度小于充满期。对于结构透气量不对称设计的伞衣,不对称充气是绝对的,圆周缝会首先在结构透气量少的部位张开。结果表明,对不同的圆周缝节点设计不同的开缝力将有助于保持良好的对称充气状态,改变开缝力的设计参数将会改变圆周缝的开缝时间及圆周缝完全张开所需的时长,将达到更好的减载效果。研究结果对圆周缝型降落伞的优化设计有一定的参考作用。     

一种适用于军机总装的产品质量先期策划流程研究

在军用飞机总装阶段存在质量管控与业务流程脱节、质量先期策划不足导致的管控成本较高等问题。为解决这些问题,基于国际航空质量组织APQP 应用指南,改进并提出适用于军用飞机总装阶段的APQP 应用指南（MAFA-APQP）,包括理论模型、核心内容以及关键要素等;以航空发动机安装为对象,验证军用飞机总装APQP 在工艺流程优...     

Gray bootstrap method for estimating frequency-varying random vibration signals with small samples

During environment testing, the estimation of random vibration signals （RVS） is an important technique for the airborne platform safety and reliability. However, the available meth- ods including extreme value envelope method （EVEM）, statistical tolerances method （STM） and improved statistical tolerance method （ISTM） require large samples and typical probability distri- bution. Moreover, the frequency-varying characteristic of RVS is usually not taken into account. Gray bootstrap method （GBM） is proposed to solve the problem of estimating frequency-varying RVS with small samples. Firstly, the estimated indexes are obtained including the estimated inter- val, the estimated uncertainty, the estimated value, the estimated error and estimated reliability. In addition, GBM is applied to estimating the single flight testing of certain aircraft. At last, in order to evaluate the estimated performance, GBM is compared with bootstrap method （BM） and gray method （GM） in testing analysis. The result shows that GBM has superiority for estimating dynamic signals with small samples and estimated reliability is proved to be 100% at the given confidence level.     

Transient simulation of regression rate on thrust regulation process in hybrid rocket motor

The main goal of this paper is to study the characteristics of regression rate of solid grain during thrust regulation process. For this purpose, an unsteady numerical model of regression rate is established. Gas–solid coupling is considered between the solid grain surface and combustion gas.Dynamic mesh is used to simulate the regression process of the solid fuel surface. Based on this model, numerical simulations on a H2O2/HTPB(hydroxyl-terminated polybutadiene) hybrid motor have been performed in the flow control process. The simulation results show that under the step change of the oxidizer mass flow rate condition, the regression rate cannot reach a stable value instantly because the flow field requires a short time period to adjust. The regression rate increases with the linear gain of oxidizer mass flow rate, and has a higher slope than the relative inlet function of oxidizer flow rate. A shorter regulation time can cause a higher regression rate during regulation process. The results also show that transient calculation can better simulate the instantaneous regression rate in the operation process.     

复合材料夹层结构在航空领域的应用

详细描述了复合材料夹层结构及几种常用芯材的性能特点,综合分析了复合材料夹层结构在飞机上的应用案例,对各种夹层结构芯材成型工艺的重点、难点进行了探析,得到了复合材料夹层结构的性能概况及使用工艺要求,可为复合材料夹层结构设计、制造提供参考。